Cheap IP Takeover: Accomplish IP takeover with ping, bash, & network utility ?

[hostmedic]

Has anyone tried to perform an IP takeover with ping, bash, and a simple network utility as described online here:

http://hacks.oreilly.com/pub/h/63

#!/bin/bash
OTHER="brain"
PUBLIC="208.201.239.37"

PAUSE=3

PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/sbin
MISSED=0

while true; do 
if ! ping -c 1 -w 1 $OTHER > /dev/null; then 
((MISSED++))
else
if [ $MISSED -gt 2 ]; then
ifconfig eth0:$OTHER down
fi
MISSED=0
fi; 

if [ $MISSED -eq 2 ]; then
ifconfig eth0:$OTHER $PUBLIC
#
# ...but see discussion below...
#
fi
sleep $PAUSE; 
done 

Naturally, set OTHER to "pinky" and PUBLIC to "208.201.239.36" on the copy that runs on Brain.

Let's suppose that Brain suddenly stops responding on 208.201.239.17 (say a network tech accidentally pulled the wrong plug when working on the rack). After missing 3 pings in a row, Pinky will leap into action, bringing up eth0:brain up as 208.201.239.37, the public IP that Brain is supposed to be serving. It will then continue to watch Brain's real IP address, and relinquish control when it is back online. The ping -c 1 -w 1 means "send one ping packet, and time out after one second, no matter what happens." ping will return non-zero if the packet didn't come back in the one second time limit.

But this isn't quite the entire solution. Although Pinky is now answering for Brain, any machines on the same network as the two servers (notably, the router just upstream at your ISP) will have the wrong MAC address cached for 208.201.239.37. With the wrong MAC address cached, no traffic will flow to Pinky, since it will only respond to packets that bear its own MAC address. How can we tell all of the machines on the 208.201.239.0 network that the MAC address for 208.201.239.37 has been updated?

One way is to use the send_arp utility from the High Availability Linux project. This very handy (and tiny) utility will craft an ARP packet to your specifications and send it to a MAC address of your choice on the local network. If we specify all ones (i.e., ff:ff:ff:ff:ff:ff) for the destination, then it effectively becomes a broadcast ARP packet. While most routers won't update their ARP tables when they see unrequested ARP broadcasts, such a packet will signal them to resend an ARP request, to which Pinky will obligingly reply. The advantage of using broadcast is that it will signal all machines on the subnet simultaneously, instead of having to track all of the MAC addresses of machines that need updating.

The syntax of send_arp is send_arp [Source IP] [Source MAC] [Target IP] [Target MAC]. For example, our simple monitoring script above should run the following when it detects that Brain is down:

send_arp 208.201.239.37 00:11:22:aa:bb:cc 208.201.239.37 fffffffffff(Where 00:11:22:aa:bb:cc is the hardware MAC address of Pinky's eth0.) The script can continue to watch to watch when Brain's real IP address (208.201.239.17) becomes available. When it does, we can bring eth0:brain back down and let Brain worry about updating the ARP cache again (which it should be set to do on boot).

There are a number of improvements that could be made to this technique. For one thing, just because 208.201.239.17 is up doesn't guarantee that 208.201.239.37 is also available. Also, ping isn't the best test for service availability (a better test might be to actually request a web page from the other machine and make sure that it has a closing </html> tag).

I am looking to see if this has been done ? successfully ?

[hostmedic]

anyone done this with success?

[expedio]

We have successfully designed and implemented cpanel clusters with full data redundancy and automatic failover without IP change.

PM me for more details.