1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Quota Problems

Discussion in 'General Discussion' started by DynamiteDJ, Nov 13, 2009.

  1. DynamiteDJ

    DynamiteDJ New Member

    Joined:
    Jul 15, 2009
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    0
    Hi,

    I have just purchased a VPS with ample specifications to run Cpanel VPS Optimised, the VPS was installed with CentOS and Cpanel installed with no errors as everything was working.

    I created an account on the server (master account) and now i am having an issue with

    a) transferring accounts from my old server to this one

    b) Selecting any of the options from the WHM (left pane) such as modify account/edit DNS e.t.c.

    The error i am receiving is stating there is a quota issue but Quota is turned off on my machine and also i only have 1 partition (filesystem) setup.

    The Quote is the error i am receiving

    Code:
    root@srv1 [/var/cpanel/logs]# df
    Filesystem           1K-blocks      Used Available Use% Mounted on
    /dev/simfs            52428800   4228560  48200240   9% /
    none                   4079656         4   4079652   1% /dev
    root@srv1 [/var/cpanel/logs]#
    
    Code:
    
    Output from /etc/fstab/
    
    none    /dev/pts        devpts  rw      0       0
    
    Any help appreciated.
     
  2. Infopro

    Infopro cPanel Sr. Product Evangelist
    Staff Member

    Joined:
    May 20, 2003
    Messages:
    12,123
    Likes Received:
    33
    Trophy Points:
    48
    Location:
    Pennsylvania
  3. cPanelDon

    cPanelDon cPanel Quality Assurance Analyst
    Staff Member

    Joined:
    Nov 5, 2008
    Messages:
    2,558
    Likes Received:
    6
    Trophy Points:
    38
    Location:
    Houston, Texas, U.S.A.
    It appears that the VPS type is that of Virtuozzo or OpenVZ; for these systems please check the output from the following command to see if the VPS container is reaching limits defined by the hardware node configuration as indicated by the failure count in the following file.
    /proc/user_beancounters

    The following could be used to check the status information from the aforementioned file:
    Code:
    # cat /proc/user_beancounters
    For output that may be easier to copy and paste and remain readable, I recommend the following:
    Code:
    # cat /proc/user_beancounters | tr -s [:space:]
     

Share This Page