jlucho

Well-Known Member
Aug 5, 2006
85
1
158
hello friends

I have a backup disk, but I can not see it with: "df -h"

df -h , show this:

Filesystem Size Used Avail Use% Mounted on
/dev/sda5 1.8T 661G 1.1T 39% /
tmpfs 16G 0 16G 0% /dev/shm
/dev/sda1 488M 165M 298M 36% /boot
/dev/sda3 16G 411M 15G 3% /tmp



cat /etc/fstab , show this:

UUID=cd67453e-5625-42ee-bc2c-e12e2a8dd953 / ext4 usrjquota=quota.user,jqfmt=vfsv0 1 1
UUID=207327a2-c801-4ac6-8471-7d70f57a95cc /boot ext4 defaults 1 2
UUID=5efd52f9-a2a3-487b-ad1c-bb7ec5cd68b9 /tmp ext4 defaults 1 2
UUID=7e981fa6-c77f-4ccf-a037-398cad817b6d swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0


The backup disk, works correctly, since I can store information inside the disk
How can you do, to display the BACKUP disk, when using "df -h"?

Similary to :

Filesystem Size Used Avail Use% Mounted on
/dev/sda5 886G 202G 639G 24% /
tmpfs 16G 0 16G 0% /dev/shm
/dev/sdb1 917G 415G 457G 48% /backup
/dev/sda1 488M 165M 299M 36% /boot
/dev/sda3 16G 1.3G 14G 9% /tmp
 

cPanelMichael

Administrator
Staff member
Apr 11, 2011
47,904
2,218
463
cat /etc/fstab , show this:

UUID=cd67453e-5625-42ee-bc2c-e12e2a8dd953 / ext4 usrjquota=quota.user,jqfmt=vfsv0 1 1
UUID=207327a2-c801-4ac6-8471-7d70f57a95cc /boot ext4 defaults 1 2
UUID=5efd52f9-a2a3-487b-ad1c-bb7ec5cd68b9 /tmp ext4 defaults 1 2
UUID=7e981fa6-c77f-4ccf-a037-398cad817b6d swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
Hello,

I don't see anything configured for /backup on this system. Could you check with your provider/data center to verify how the additional drive was mounted?

Thanks!
 

asmithjr

Well-Known Member
Jun 13, 2003
516
8
168
try this. from the promot issue
sfdisk -l
this will display your disks.
based on the df you showed earlier there is a /dev/sda. I would expect to see something like maybe /dev/sdb. Post the output of the sfdisk -l command