dsampaio

Member
Mar 14, 2004
23
0
151
Hi, I just can´t install ClamAV Perl! I have read all the cPanel´s forumbut got no anser to this problem! I´m posting the results that I get when I run /scripts/perlinstaller Mail::ClamAV.

Code:
Method: Perl Expect
Testing connection speed...(this could take a while)....Done
Three usable mirrors located
Mirror Check passed for www.theshell.com (/index.html)
commit: wrote /usr/lib/perl5/5.8.7/CPAN/Config.pm
CPAN: Storable loaded ok
Going to read /home/.cpan/Metadata
  Database was generated on Thu, 17 Nov 2005 04:53:05 GMT
Running install for module Mail::ClamAV
Running make for S/SA/SABECK/Mail-ClamAV-0.17.tar.gz
CPAN: Digest::MD5 loaded ok
CPAN: Compress::Zlib loaded ok
Checksum for /home/.cpan/sources/authors/id/S/SA/SABECK/Mail-ClamAV-0.17.tar.gz ok
Scanning cache /home/.cpan/build for sizes
Mail-ClamAV-0.17/
Mail-ClamAV-0.17/Inline/
Mail-ClamAV-0.17/Inline/MakeMaker.pm
Mail-ClamAV-0.17/Makefile.PL
Mail-ClamAV-0.17/README
Mail-ClamAV-0.17/t/
Mail-ClamAV-0.17/t/Mail-ClamAV.t
Mail-ClamAV-0.17/t/eicarcom2.zip
Mail-ClamAV-0.17/t/virus.eml
Mail-ClamAV-0.17/config.pl
Mail-ClamAV-0.17/MANIFEST
Mail-ClamAV-0.17/INSTALL
Mail-ClamAV-0.17/ClamAV.pm
Mail-ClamAV-0.17/META.yml
Mail-ClamAV-0.17/Changes
Removing previously used /home/.cpan/build/Mail-ClamAV-0.17

  CPAN.pm: Going to build S/SA/SABECK/Mail-ClamAV-0.17.tar.gz

WARNING ------------------------------------------------
WARNING You have an older version of clamav or
WARNING clamav-config is not in your path
WARNING If you get compile errors you will either
WARNING need to upgrade clamav to atleast 0.73
WARNING or make sure clamav-config is in your path
WARNING ------------------------------------------------
Checking if your kit is complete...
Looks good
Note (probably harmless): No library found for -lclamav
Writing Makefile for Mail::ClamAV
cp ClamAV.pm blib/lib/Mail/ClamAV.pm
/usr/bin/perl -Mblib -MInline=NOISY,_INSTALL_ -MMail::ClamAV -e1 0.17 blib/arch
Starting Build Prepocess Stage
Finished Build Prepocess Stage

Starting Build Parse Stage
Finished Build Parse Stage

Starting Build Glue 1 Stage
Finished Build Glue 1 Stage

Starting Build Glue 2 Stage
Finished Build Glue 2 Stage

Starting Build Glue 3 Stage
Finished Build Glue 3 Stage

Starting Build Compile Stage
  Starting "perl Makefile.PL" Stage
Note (probably harmless): No library found for -lclamav
Writing Makefile for Mail::ClamAV
  Finished "perl Makefile.PL" Stage

  Starting "make" Stage
make[1]: Entering directory `/home/.cpan/build/Mail-ClamAV-0.17/_Inline/build/Mail/ClamAV'
/usr/bin/perl /usr/lib/perl5/5.8.7/ExtUtils/xsubpp  -typemap /usr/lib/perl5/5.8.7/ExtUtils/typemap   ClamAV.xs > ClamAV.xsc && mv ClamAV.xsc ClamAV.c
cc -c  -I/home/.cpan/build/Mail-ClamAV-0.17 -I/usr/include -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2   -DVERSION=\"0.17\" -DXS_VERSION=\"0.17\" -fpic "-I/usr/lib/perl5/5.8.7/i686-linux/CORE"   ClamAV.c
ClamAV.xs:11:20: clamav.h: No such file or directory
ClamAV.xs:19: error: field `limits' has incomplete type
ClamAV.xs:20: error: field `st' has incomplete type
ClamAV.xs: In function `clamav_perl_new':
ClamAV.xs:48: error: invalid application of `sizeof' to incomplete type `cl_stat'
ClamAV.xs: In function `clamav_perl__scanbuff':
ClamAV.xs:180: error: `CL_VIRUS' undeclared (first use in this function)
ClamAV.xs:180: error: (Each undeclared identifier is reported only once
ClamAV.xs:180: error: for each function it appears in.)
ClamAV.xs:182: error: `CL_CLEAN' undeclared (first use in this function)
ClamAV.xs:185: warning: passing arg 2 of `Perl_sv_setpv' makes pointer from integer without a cast
ClamAV.xs: In function `clamav_perl__scanfd':
ClamAV.xs:224: error: `CL_VIRUS' undeclared (first use in this function)
ClamAV.xs:226: error: `CL_CLEAN' undeclared (first use in this function)
ClamAV.xs:229: warning: passing arg 2 of `Perl_sv_setpv' makes pointer from integer without a cast
ClamAV.xs: In function `clamav_perl__scanfile':
ClamAV.xs:265: error: `CL_VIRUS' undeclared (first use in this function)
ClamAV.xs:267: error: `CL_CLEAN' undeclared (first use in this function)
ClamAV.xs:270: warning: passing arg 2 of `Perl_sv_setpv' makes pointer from integer without a cast
ClamAV.xs: In function `error':
ClamAV.xs:293: warning: assignment makes pointer from integer without a cast
ClamAV.xs: In function `clamav_perl_constant':
ClamAV.xs:300: error: `CL_CLEAN' undeclared (first use in this function)
ClamAV.xs:301: error: `CL_VIRUS' undeclared (first use in this function)
ClamAV.xs:303: error: `CL_EMAXREC' undeclared (first use in this function)
ClamAV.xs:304: error: `CL_EMAXSIZE' undeclared (first use in this function)
ClamAV.xs:305: error: `CL_EMAXFILES' undeclared (first use in this function)
ClamAV.xs:306: error: `CL_ERAR' undeclared (first use in this function)
ClamAV.xs:307: error: `CL_EZIP' undeclared (first use in this function)
ClamAV.xs:308: error: `CL_EMALFZIP' undeclared (first use in this function)
ClamAV.xs:309: error: `CL_EGZIP' undeclared (first use in this function)
ClamAV.xs:310: error: `CL_EBZIP' undeclared (first use in this function)
ClamAV.xs:311: error: `CL_EOLE2' undeclared (first use in this function)
ClamAV.xs:312: error: `CL_EMSCOMP' undeclared (first use in this function)
ClamAV.xs:313: error: `CL_EMSCAB' undeclared (first use in this function)
ClamAV.xs:314: error: `CL_EACCES' undeclared (first use in this function)
ClamAV.xs:315: error: `CL_ENULLARG' undeclared (first use in this function)
ClamAV.xs:317: error: `CL_ETMPFILE' undeclared (first use in this function)
ClamAV.xs:318: error: `CL_EFSYNC' undeclared (first use in this function)
ClamAV.xs:319: error: `CL_EMEM' undeclared (first use in this function)
ClamAV.xs:320: error: `CL_EOPEN' undeclared (first use in this function)
ClamAV.xs:321: error: `CL_EMALFDB' undeclared (first use in this function)
ClamAV.xs:322: error: `CL_EPATSHORT' undeclared (first use in this function)
ClamAV.xs:323: error: `CL_ETMPDIR' undeclared (first use in this function)
ClamAV.xs:324: error: `CL_ECVD' undeclared (first use in this function)
ClamAV.xs:325: error: `CL_ECVDEXTR' undeclared (first use in this function)
ClamAV.xs:326: error: `CL_EMD5' undeclared (first use in this function)
ClamAV.xs:327: error: `CL_EDSIG' undeclared (first use in this function)
ClamAV.xs:328: error: `CL_EIO' undeclared (first use in this function)
ClamAV.xs:329: error: `CL_EFORMAT' undeclared (first use in this function)
ClamAV.xs:331: error: `CL_SCAN_RAW' undeclared (first use in this function)
ClamAV.xs:332: error: `CL_SCAN_ARCHIVE' undeclared (first use in this function)
ClamAV.xs:333: error: `CL_SCAN_MAIL' undeclared (first use in this function)
ClamAV.xs:334: error: `CL_SCAN_DISABLERAR' undeclared (first use in this function)
ClamAV.xs:335: error: `CL_SCAN_OLE2' undeclared (first use in this function)
ClamAV.xs:336: error: `CL_SCAN_BLOCKENCRYPTED' undeclared (first use in this function)
ClamAV.xs:337: error: `CL_SCAN_HTML' undeclared (first use in this function)
ClamAV.xs:338: error: `CL_SCAN_PE' undeclared (first use in this function)
ClamAV.xs:339: error: `CL_SCAN_BLOCKBROKEN' undeclared (first use in this function)
ClamAV.xs:340: error: `CL_SCAN_MAILURL' undeclared (first use in this function)
ClamAV.xs:341: error: `CL_SCAN_BLOCKMAX' undeclared (first use in this function)
ClamAV.xs:343: error: `CL_SCAN_STDOPT' undeclared (first use in this function)
make[1]: *** [ClamAV.o] Error 1
make[1]: Leaving directory `/home/.cpan/build/Mail-ClamAV-0.17/_Inline/build/Mail/ClamAV'


A problem was encountered while attempting to compile and install your Inline
C code. The command that failed was:
  make

The build directory was:
/home/.cpan/build/Mail-ClamAV-0.17/_Inline/build/Mail/ClamAV

To debug the problem, cd to the build directory, and inspect the output files.

 at /home/.cpan/build/Mail-ClamAV-0.17/blib/lib/Mail/ClamAV.pm line 193
BEGIN failed--compilation aborted at /home/.cpan/build/Mail-ClamAV-0.17/blib/lib/Mail/ClamAV.pm line 537.
Compilation failed in require.
BEGIN failed--compilation aborted.
make: *** [ClamAV.inl] Error 25
  /usr/bin/make  -- NOT OK
Running make install
  make had returned bad status, install seems impossible

perlmod--Install done

Thanks.
 

chirpy

Well-Known Member
Verifed Vendor
Jun 15, 2002
13,437
33
473
Go on, have a guess
The big error message would seem to be the problem:
WARNING You have an older version of clamav or
WARNING clamav-config is not in your path
WARNING If you get compile errors you will either
WARNING need to upgrade clamav to atleast 0.73
WARNING or make sure clamav-config is in your path
 

dsampaio

Member
Mar 14, 2004
23
0
151
Thanks chirpy.
But it´s weird to get this message since I have never installed ClamAV on this server...

Thanks