CPanel not accessible from same network

[amadino13]

Hello,

I am having an issue with accessing CPanel even from the same network. The CentOS Server is on 10.69.3.173.

If I type that IP http://10.69.3.173:2087, its being renamed to https://nameless.blkhost.com:2087/ however I cannot load the page . I can access it through https://10-69-3-173:2087/

What am I doing wrong?

 

[amadino13]

[[email protected] ~]# ip add | grep "inet"
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
    inet 10.69.3.173/24 brd 10.69.3.255 scope global eth0
    inet 10.69.4.1/24 brd 10.69.4.255 scope global eth0:cp1
    inet 10.69.4.2/24 brd 10.69.4.255 scope global secondary eth0:cp2
    inet 10.69.4.3/24 brd 10.69.4.255 scope global secondary eth0:cp3
    inet 10.69.4.251/24 brd 10.69.4.255 scope global secondary eth0:cp251
    inet 10.69.4.252/24 brd 10.69.4.255 scope global secondary eth0:cp252
    inet 10.69.4.253/24 brd 10.69.4.255 scope global secondary eth0:cp253
    inet 10.69.4.254/24 brd 10.69.4.255 scope global secondary eth0:cp254
    inet6 fe80::5054:ff:fe87:f82c/64 scope link
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0

 

[cPRex]

Hey there! Since you mentioned you could access WHM, can you check the WHM >> Tweak Settings area under the "Redirection" tab and ensure that the options are set to "Origin domain name" and not "Hostname" ? The behavior you're experiencing indicates that it is trying to redirect traffic to the server's hostname, which may not perform as expected over a private network address.

 

[amadino13]

The problem turns out was from my ISP. I called them to change the modem to bridge mode. I had set up my firewall to allow 1:1 for the CPanel server however for whatever reason it didn't work until my modem was switched to bridge.

 

[cPRex]

I'm glad they were able to help find the issue!