The Community Forums

Interact with an entire community of cPanel & WHM users!
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

File::Scan::ClamAV

Discussion in 'General Discussion' started by BigP, Jun 7, 2007.

  1. BigP

    BigP Registered

    Joined:
    Nov 13, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Hi,

    I received below message to my mail box. It says File::Scan::ClamAV could not be installed when you do /usr/local/cpanel/bin/checkperlmodules. Any idea how to fix it?

    ------------------------
    Subject: [checkperlmodules] The perl module File::Scan::ClamAV could not be
    installed.

    This module is required by cPanel, and the system may not function correctly
    until it is installed, and functional. Below is the results of the
    auto-install attempt:

    Test Run
    ==============
    Can't locate File/Scan/ClamAV.pm in @INC (@INC contains:
    /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5
    /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
    /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi
    /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi
    /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi
    /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi
    /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
    /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl/5.8.4
    /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2
    /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0
    /usr/lib/perl5/site_perl
    /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
    /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi
    /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi
    /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi
    /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi
    /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
    /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4
    /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.2
    /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl/5.8.0
    /usr/lib/perl5/vendor_perl .) at - line 1.
    BEGIN failed--compilation aborted at - line 1.


    Installer Run
    ==============
    Fetching CPAN timestamp...Done
    Testing connection speed...(this could take a while)...Done
    Ping:0.737 Testing connection speed to cpan-du.viaverio.com using
    pureperl...(104800.00 bytes/s)...Done
    Ping:6.539 Testing connection speed to mirror.datapipe.net using
    pureperl...(157600.00 bytes/s)...Done
    Ping:5.935 Testing connection speed to mirrors.24-7-solutions.net using
    pureperl...(104366.67 bytes/s)...Done
    Three usable mirrors located
    Mirror Check passed for mirror.datapipe.net (/index.html)
    Unknown config variable 'less'
    commit: wrote '/usr/lib/perl5/5.8.5/CPAN/Config.pm'
    CPAN: File::HomeDir loaded ok (v0.65)
    CPAN: Storable loaded ok (v2.16)
    Going to read /home/.cpan/Metadata
    Database was generated on Tue, 05 Jun 2007 23:09:03 GMT
    Running install for module 'File::Scan::ClamAV'
    Running make for C/CF/CFABER/File-Scan-ClamAV-1.8.tar.gz
    CPAN: Digest::SHA loaded ok (v5.44)
    CPAN: Compress::Zlib loaded ok (v2.001)
    Checksum for
    /home/.cpan/sources/authors/id/C/CF/CFABER/File-Scan-ClamAV-1.8.tar.gz ok
    File-Scan-ClamAV-1.8/
    File-Scan-ClamAV-1.8/t/
    File-Scan-ClamAV-1.8/t/05rawscan.t
    File-Scan-ClamAV-1.8/t/03quit.t
    File-Scan-ClamAV-1.8/t/06streamscan.t
    File-Scan-ClamAV-1.8/t/04scan.t
    File-Scan-ClamAV-1.8/t/mkconf.pl
    File-Scan-ClamAV-1.8/t/01ping.t
    File-Scan-ClamAV-1.8/t/00basic.t
    File-Scan-ClamAV-1.8/t/02reload.t
    File-Scan-ClamAV-1.8/Changes
    File-Scan-ClamAV-1.8/testfiles/
    File-Scan-ClamAV-1.8/testfiles/innocent
    File-Scan-ClamAV-1.8/testfiles/clamavtest
    File-Scan-ClamAV-1.8/testfiles/clamavtest.gz
    File-Scan-ClamAV-1.8/testfiles/clamavtest.zip
    File-Scan-ClamAV-1.8/MANIFEST
    File-Scan-ClamAV-1.8/MANIFEST.SKIP
    File-Scan-ClamAV-1.8/META.yml
    File-Scan-ClamAV-1.8/lib/
    File-Scan-ClamAV-1.8/lib/File/
    File-Scan-ClamAV-1.8/lib/File/Scan/
    File-Scan-ClamAV-1.8/lib/File/Scan/ClamAV.pm
    File-Scan-ClamAV-1.8/README
    File-Scan-ClamAV-1.8/Makefile.PL
    CPAN: File::Temp loaded ok (v0.18)

    CPAN.pm: Going to build C/CF/CFABER/File-Scan-ClamAV-1.8.tar.gz

    Cannot find clamd in /root/bin (or a number of other places)
    - are you sure clamav in installed?
    CPAN: YAML loaded ok (v0.62)
    make: *** No targets specified and no makefile found. Stop.
    CFABER/File-Scan-ClamAV-1.8.tar.gz
    /usr/bin/make -- NOT OK
    Running make install
    Make had returned bad status, install seems impossible
    perlmod--Install done
    ------------------------
     
  2. tuxguroo

    tuxguroo Member

    Joined:
    Aug 28, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    1
    Try upgrading perl in your server :)
     
  3. BigP

    BigP Registered

    Joined:
    Nov 13, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Hi,

    Thanks tuxguroo, it worked.
     
Loading...

Share This Page