The Community Forums

Interact with an entire community of cPanel & WHM users!
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Frontpage core dumps on FreeBSD 5.3

Discussion in 'General Discussion' started by laszlof, Apr 1, 2005.

  1. laszlof

    laszlof Member

    Joined:
    Dec 22, 2004
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Whenever i try to install frontpage extensions on a site, i get the following error message:

    Using Frontpage 5.x!
    Segmentation fault (core dumped)

    No such file or directory


    I tracked this down to the owsadm.exe file, as shown in /var/log/messages:

    *** messages ***
    Apr 1 10:51:52 ritamari kernel: pid 22332 (owsadm.exe), uid 0: exited on signal 11 (core dumped)


    Here is the strace output from the executable:

    ritamari# strace ./owsadm.exe
    execve(0xbfbfe60c, [0xbfbfeaf0], [/* 0 vars */]) = 0
    mmap(0, 3880, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x284a5000
    munmap(0x284a5000, 3880) = 0
    __sysctl([...], 0x284a1a4c, 0xbfbfe8a4, NULL, 0) = 0
    mmap(0, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0) = 0x284a5000
    issetugid(0) = 0
    open("/etc/libmap.conf", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/var/run/ld-elf.so.hints", O_RDONLY) = 3
    read(3, "\0\t%o => %p (%x)\n\0LD_TRACE_LOADED"..., 128) = 128
    lseek(3, 128, SEEK_SET) = 128
    read(3, "/lib:/usr/lib:/usr/lib/compat:/u"..., 129) = 129
    close(3) = 0
    access("/lib/libcrypt.so.2", F_OK) = 0
    open("/lib/libcrypt.so.2", O_RDONLY) = 3
    fstat(3, {st_mode=0, st_size=0, ...}) = 0
    read(3, "\177ELF\1\1\1\t\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\21 0\16"..., 4096) = 4096
    mmap(0, 98304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_NOCORE, 3, 0) = 0x284ad000
    mprotect(0x284b2000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC) = 0
    mprotect(0x284b2000, 4096, PROT_READ|PROT_EXEC) = 0
    mmap(0x284b3000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x6000) = 0x284b3000
    mmap(0x284b4000, 69632, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0x284b4000
    close(3) = 0
    access("/lib/libm.so.2", F_OK) = -1 ENOENT (No such file or directory)
    access("/usr/lib/libm.so.2", F_OK) = -1 ENOENT (No such file or directory)
    access("/usr/lib/compat/libm.so.2", F_OK) = 0
    open("/usr/lib/compat/libm.so.2", O_RDONLY) = 3
    fstat(3, {st_mode=0, st_size=0, ...}) = 0
    read(3, "\177ELF\1\1\1\t\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0L0\ 0\000"..., 4096) = 4096
    mmap(0, 110592, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_NOCORE, 3, 0) = 0x284c5000
    mprotect(0x284db000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC) = 0
    mprotect(0x284db000, 4096, PROT_READ|PROT_EXEC) = 0
    mmap(0x284dc000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x16000) = 0x284dc000
    close(3) = 0
    access("/lib/libc_r.so.4", F_OK) = -1 ENOENT (No such file or directory)
    access("/usr/lib/libc_r.so.4", F_OK) = -1 ENOENT (No such file or directory)
    access("/usr/lib/compat/libc_r.so.4", F_OK) = 0
    open("/usr/lib/compat/libc_r.so.4", O_RDONLY) = 3
    fstat(3, {st_mode=0, st_size=0, ...}) = 0
    read(3, "\177ELF\1\1\1\0FreeBSD\0\3\0\3\0\1\0\0\0d=\1\0004\ 0\0\0"..., 4096) = 4096
    mmap(0, 614400, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_NOCORE, 3, 0) = 0x284e0000
    mprotect(0x2855e000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC) = 0
    mprotect(0x2855e000, 4096, PROT_READ|PROT_EXEC) = 0
    mmap(0x2855f000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x7e000) = 0x2855f000
    mmap(0x28564000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0x28564000
    close(3) = 0
    access("/lib/libc.so.4", F_OK) = -1 ENOENT (No such file or directory)
    access("/usr/lib/libc.so.4", F_OK) = -1 ENOENT (No such file or directory)
    access("/usr/lib/compat/libc.so.4", F_OK) = 0
    open("/usr/lib/compat/libc.so.4", O_RDONLY) = 3
    fstat(3, {st_mode=0, st_size=0, ...}) = 0
    read(3, "\177ELF\1\1\1\t\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\26 4(\1"..., 4096) = 4096
    mmap(0, 626688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_NOCORE, 3, 0) = 0x28576000
    mprotect(0x285f7000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC) = 0
    mprotect(0x285f7000, 4096, PROT_READ|PROT_EXEC) = 0
    mmap(0x285f8000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x81000) = 0x285f8000
    mmap(0x285fd000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0x285fd000
    close(3) = 0
    mmap(0, 2104, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x2860f000
    munmap(0x2860f000, 2104) = 0
    mmap(0, 600, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x2860f000
    munmap(0x2860f000, 600) = 0
    mmap(0, 2208, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x2860f000
    munmap(0x2860f000, 2208) = 0
    mmap(0, 13080, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x2860f000
    munmap(0x2860f000, 13080) = 0
    mmap(0, 13360, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x2860f000
    munmap(0x2860f000, 13360) = 0
    syscall_416(0x4, 0xbfbfe9f0, 0xbfbfe9d0) = 0
    sigprocmask(SIG_BLOCK, NULL, []) = 0
    syscall_416(0x4, 0xbfbfe9d0, 0) = 0
    sysarch(0x1, 0xbfbfea00) = 17
    readlink("/etc/malloc.conf", 0xbfbfe914, 63) = -1 ENOENT (No such file or directory)
    mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0) = 0x2860f000
    break(0x84fa000) = 0
    break(0x84fb000) = 0
    --- SIGSEGV (Segmentation fault) ---
    --- SIGSEGV (Segmentation fault) ---


    Again, I am running FreeBSD 5.3 STABLE with WHM 10.0.0-R11. Any help would be greatly appriciated. Thanks!

    -Frank
     
  2. cPanelNick

    cPanelNick Administrator
    Staff Member

    Joined:
    Mar 9, 2015
    Messages:
    3,426
    Likes Received:
    2
    Trophy Points:
    38
    cPanel Access Level:
    DataCenter Provider
    Try

    /scripts/installfpfreebsd
     
  3. laszlof

    laszlof Member

    Joined:
    Dec 22, 2004
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Nick, thanks for your reply. for future reference, I have opened a ticket for this as cPanel ID# 94665.

    The script seemed to run just fine, i previously had an error with the fpexe file, which i had to chflags to get it to overwrite it. But I still get the same error when i try to install from within WHM. Anymore ideas? Thanks


    -Frank
     
  4. yuretz

    yuretz Registered

    Joined:
    Oct 16, 2004
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    same here.

    os: FreeBSD 5.3-RELEASE-p5
     
Loading...

Share This Page