Please whitelist cPanel in your adblocker so that you’re able to see our version release promotions, thanks!

The Community Forums

Interact with an entire community of cPanel & WHM users!

kvm loop can t delete device dev loop0 device or resource busy

Discussion in 'CloudLinux' started by holinhot, Jan 9, 2014.

  1. holinhot

    holinhot Registered

    Joined:
    Jan 19, 2013
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    cPanel Access Level:
    Root Administrator
    Hello,all

    I'm using cloudlinux and have installed cpanel for KVM vps,but the rebooting system display "loop can t delete device dev loop0 device or resource busy"

    as shown in the figure:


    my disk:
    Code:
    root@clcla1923 [~]# df -h
    Filesystem                         Size  Used Avail Use% Mounted on
    /dev/mapper/vg_clcla1923-LogVol02   32G  4.6G   26G  16% /
    tmpfs                              1.9G     0  1.9G   0% /dev/shm
    /dev/vda1                          194M   49M  135M  27% /boot
    /dev/mapper/vg_clcla1923-LogVol01  158G  592M  149G   1% /home
    /usr/tmpDSK                        485M   11M  449M   3% /tmp
    root@clcla1923 [~]# fdisk -l
    
    Disk /dev/vda: 214.7 GB, 214748364800 bytes
    16 heads, 63 sectors/track, 416101 cylinders
    Units = cylinders of 1008 * 512 = 516096 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00065368
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/vda1   *           3         409      204800   83  Linux
    Partition 1 does not end on cylinder boundary.
    /dev/vda2             409      416102   209509376   8e  Linux LVM
    Partition 2 does not end on cylinder boundary.
    
    Disk /dev/mapper/vg_clcla1923-LogVol00: 8589 MB, 8589934592 bytes
    255 heads, 63 sectors/track, 1044 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00000000
    
    
    Disk /dev/mapper/vg_clcla1923-LogVol02: 34.1 GB, 34145828864 bytes
    255 heads, 63 sectors/track, 4151 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00000000
    
    
    Disk /dev/mapper/vg_clcla1923-LogVol01: 171.8 GB, 171798691840 bytes
    255 heads, 63 sectors/track, 20886 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00000000
    
    root@clcla1923 [~]#
    and
    Code:
    root@clcla1923 [~]# df -h
    Filesystem                         Size  Used Avail Use% Mounted on
    /dev/mapper/vg_clcla1923-LogVol02   32G  4.6G   26G  16% /
    tmpfs                              1.9G     0  1.9G   0% /dev/shm
    /dev/vda1                          194M   49M  135M  27% /boot
    /dev/mapper/vg_clcla1923-LogVol01  158G  592M  149G   1% /home
    /usr/tmpDSK                        485M   11M  449M   3% /tmp
    root@clcla1923 [~]#
    fstab
    Code:
    root@clcla1923 [~]# cat /etc/fstab
    
    #
    # /etc/fstab
    # Created by anaconda on Wed Jan  8 06:01:57 2014
    #
    # Accessible filesystems, by reference, are maintained under '/dev/disk'
    # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
    #
    /dev/mapper/vg_clcla1923-LogVol02 /                       ext4    defaults        1 1
    UUID=4816b084-1263-46c3-81d1-0c08c00bf3b3 /boot                   ext4    defaults        1 2
    /dev/mapper/vg_clcla1923-LogVol01 /home                   ext4    defaults        1 2
    /dev/mapper/vg_clcla1923-LogVol00 swap                    swap    defaults        0 0
    tmpfs                   /dev/shm                tmpfs   defaults        0 0
    devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
    sysfs                   /sys                    sysfs   defaults        0 0
    proc                    /proc                   proc    defaults        0 0
    /usr/tmpDSK             /tmp                    ext3    defaults,noauto        0 0
    root@clcla1923 [~]#
    as shown in the figure:


    Thanks Very much
     

    Attached Files:

  2. cPanelPeter

    cPanelPeter Technical Analyst III
    Staff Member

    Joined:
    Sep 23, 2013
    Messages:
    575
    Likes Received:
    20
    Trophy Points:
    93
    cPanel Access Level:
    Root Administrator
    Twitter:
    Hello,

    Are you certain the device isn't just busy? Have you checked with the fuser command?

    Code:
    fuser -c /dev/loop0
    fuser -d /dev/loop0
    fuser -f /dev/loop0
    
    If you get a PID back on it, try to stop whatever process it is first.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Loading...

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice