The Community Forums

Interact with an entire community of cPanel & WHM users!
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

logwatch error

Discussion in 'General Discussion' started by Eyal - IsraServ, Jul 9, 2005.

  1. Eyal - IsraServ

    Joined:
    Mar 10, 2004
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    1
    --------------------- Kernel Begin ------------------------


    WARNING: Kernel Errors Present
    end_request: I/O error, dev 03:02 (hda)...: 8Time(s)
    hda: dma_intr: error=0x40 { Uncorrect...: 8Time(s)
    hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }...: 8Time(s)
    raid1: hda2: unrecoverable I/O read error for block 147618...: 8Time(s)

    ---------------------- Kernel End -------------------------

    should i worry ?
    i have a software raid1 on my linux , and when i type cat /proc/mdstat i get :

    Personalities : [raid1]
    read_ahead 1024 sectors
    md2 : active raid1 hda3[0] hdb3[1]
    4096448 blocks [2/2] [UU]

    md1 : active raid1 hda2[0]
    112639680 blocks [2/1] [U_]

    md0 : active raid1 hda1[0] hdb1[1]
    305088 blocks [2/2] [UU]

    unused devices: <none>


    ---------------------------------------------------

    all my files are at md1 (as i can see in server information /dev/md1 106G 66G 36G 65% / , this mean that raid 1 isnt working ?
     
  2. chirpy

    chirpy Well-Known Member

    Joined:
    Jun 15, 2002
    Messages:
    13,475
    Likes Received:
    20
    Trophy Points:
    38
    Location:
    Go on, have a guess
    If you only get that error once when you reboot the server, it's probably OK. If you're seeing a numer of those errors when the server has been running for a while, then the drive on /dev/hda may be about to die and you should get it replaced.
     
  3. Eyal - IsraServ

    Joined:
    Mar 10, 2004
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    1
    Hi

    thanks for the fast reply , i get those error in the past of those 2 weeks every day , server's uptime is about 100+ days , so i will reboot it and i will see what is going on

    what do you think about the raid ?

    md0 (that have the [UU] ) is the boot partition . this mean that just the boot partition is under the raid1 system ?
     
  4. chirpy

    chirpy Well-Known Member

    Joined:
    Jun 15, 2002
    Messages:
    13,475
    Likes Received:
    20
    Trophy Points:
    38
    Location:
    Go on, have a guess
    With md devices, you'll probably get this information that you need from:

    mdadm --detail /dev/md0
    mdadm --detail /dev/md1
     
  5. Eyal - IsraServ

    Joined:
    Mar 10, 2004
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    1

    mdadm --detail /dev/md0
    -bash: mdadm: command not found
     
  6. chirpy

    chirpy Well-Known Member

    Joined:
    Jun 15, 2002
    Messages:
    13,475
    Likes Received:
    20
    Trophy Points:
    38
    Location:
    Go on, have a guess
    If this is a Linux server and you're running software raid, then you should be able to install mdadm with:

    /scripts/ensurerpm mdadm
     
  7. Eyal - IsraServ

    Joined:
    Mar 10, 2004
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    1
    as i can see its gone , do i wrong ?
     
Loading...

Share This Page