The Community Forums

Interact with an entire community of cPanel & WHM users!
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Support for PHP APC (PECL)

Discussion in 'General Discussion' started by dancryer, Dec 1, 2010.

  1. dancryer

    dancryer Registered

    Joined:
    Dec 1, 2010
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    PHP APC has finally seen another stable release, made just this month. I was just wondering if there's any chance of seeing support for it in cPanel soon?

    PECL :: Package :: APC

    I think it'd be very beneficial, and a good alternative to eAccellerator.
     
  2. dibarra

    dibarra Active Member
    PartnerNOC

    Joined:
    Jun 14, 2007
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    6
    You can already install it though:

    # pecl install apc

    Or, for those with /tmp mounted as noexec:

    # wget http://pecl.php.net/get/APC-3.1.6.tgz
    # tar -xvzf APC-3.1.6.tgz
    # cd APC-3.1.6
    # phpize
    # ./configure
    # make
    # make install
     
  3. cPanelDavidG

    cPanelDavidG Technical Product Specialist

    Joined:
    Nov 29, 2006
    Messages:
    11,279
    Likes Received:
    8
    Trophy Points:
    38
    Location:
    Houston, TX
    cPanel Access Level:
    Root Administrator
    Are you experiencing difficulties installing this PECL using WHM's interface for installing PECLs?
     
  4. jsedwick

    jsedwick Registered

    Joined:
    Dec 14, 2010
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Eugene, OR
    I'm unsuccessfully attempting to install APC from WHM and I'm getting the following output:
    Code:
    downloading APC-3.1.6.tgz ...
    Starting to download APC-3.1.6.tgz (148,835 bytes)
    .................................done: 148,835 bytes
    49 source files, building
    running: phpize
    Configuring for:
    PHP Api Version:         20041225
    Zend Module Api No:      20060613
    Zend Extension Api No:   220060519
    Enable per request file info about files used from the APC cache [no] : Enable spin locks (EXPERIMENTAL) [no] : building in /root/tmp/pear-build-root/APC-3.1.6
    running: /root/tmp/pear/APC/configure --enable-apc-filehits=no --enable-apc-spinlocks=no
    checking for egrep... grep -E
    checking for a sed that does not truncate output... /bin/sed
    checking for cc... cc
    checking for C compiler default output file name... a.out
    checking whether the C compiler works... yes
    checking whether we are cross compiling... no
    checking for suffix of executables...
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether cc accepts -g... yes
    checking for cc option to accept ANSI C... none needed
    checking how to run the C preprocessor... cc -E
    checking for icc... no
    checking for suncc... no
    checking whether cc understands -c and -o together... yes
    checking for system library directory... lib
    checking if compiler supports -R... no
    checking if compiler supports -Wl,-rpath,... yes
    checking build system type... x86_64-unknown-linux-gnu
    checking host system type... x86_64-unknown-linux-gnu
    checking target system type... x86_64-unknown-linux-gnu
    checking for PHP prefix... /usr/local
    checking for PHP includes... -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -I/usr/local/include/php/ext/date/lib
    checking for PHP extension directory... /usr/local/lib/php/extensions/no-debug-non-zts-20060613
    checking for PHP installed headers prefix... /usr/local/include/php
    checking if debug is enabled... no
    checking if zts is enabled... no
    checking for re2c... re2c
    checking for re2c version... invalid
    configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers.
    checking for gawk... gawk
    checking whether to enable APC support... yes, shared
    checking whether we should enable cache request file info... no
    checking whether we should use mmap... yes
    checking whether we should use semaphore locking instead of fcntl... no
    checking whether we should use pthread mutex locking... yes
    pthread mutex's are supported!
    checking whether we should use spin locks... no
    checking whether we should enable memory protection... no
    checking for zend_set_lookup_function_hook... no
    checking for sigaction... yes
    checking for union semun... no
    checking whether we should enable valgrind support... checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    yes
    checking valgrind/memcheck.h usability... no
    checking valgrind/memcheck.h presence... no
    checking for valgrind/memcheck.h... no
    checking for shm_open in -lrt... yes
    checking for ld used by cc... /usr/bin/ld
    checking if the linker (/usr/bin/ld) is GNU ld... yes
    checking for /usr/bin/ld option to reload object files... -r
    checking for BSD-compatible nm... /usr/bin/nm -B
    checking whether ln -s works... yes
    checking how to recognize dependent libraries... pass_all
    checking dlfcn.h usability... yes
    checking dlfcn.h presence... yes
    checking for dlfcn.h... yes
    checking the maximum length of command line arguments... 98304
    checking command to parse /usr/bin/nm -B output from cc object... ok
    checking for objdir... .libs
    checking for ar... ar
    checking for ranlib... ranlib
    checking for strip... strip
    checking if cc supports -fno-rtti -fno-exceptions... no
    checking for cc option to produce PIC... -fPIC
    checking if cc PIC flag -fPIC works... yes
    checking if cc static flag -static works... yes
    checking if cc supports -c -o file.o... yes
    checking whether the cc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
    checking whether -lc should be explicitly linked in... no
    checking dynamic linker characteristics... GNU/Linux ld.so
    checking how to hardcode library paths into programs... immediate
    checking whether stripping libraries is possible... yes
    checking if libtool supports shared libraries... yes
    checking whether to build shared libraries... yes
    checking whether to build static libraries... no
    
    creating libtool
    appending configuration tag "CXX" to libtool
    configure: creating ./config.status
    config.status: creating config.h
    running: make
    /bin/sh /root/tmp/pear-build-root/APC-3.1.6/libtool --mode=compile cc  -I. -I/root/tmp/pear/APC -DPHP_ATOM_INC -I/root/tmp/pear-build-root/APC-3.1.6/include -I/root/tmp/pear-build-root/APC-3.1.6/main -I/root/tmp/pear/APC -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -I/usr/local/include/php/ext/date/lib  -DHAVE_CONFIG_H  -g -O2   -c /root/tmp/pear/APC/apc.c -o apc.lo
    mkdir .libs
     cc -I. -I/root/tmp/pear/APC -DPHP_ATOM_INC -I/root/tmp/pear-build-root/APC-3.1.6/include -I/root/tmp/pear-build-root/APC-3.1.6/main -I/root/tmp/pear/APC -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -I/usr/local/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/APC/apc.c  -fPIC -DPIC -o .libs/apc.o
    In file included from /root/tmp/pear/APC/apc.c:44:
    /usr/local/include/php/ext/pcre/php_pcre.h:29:18: error: pcre.h: No such file or directory
    In file included from /root/tmp/pear/APC/apc.c:44:
    /usr/local/include/php/ext/pcre/php_pcre.h:45: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
    /usr/local/include/php/ext/pcre/php_pcre.h:46: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
    /usr/local/include/php/ext/pcre/php_pcre.h:52: error: expected specifier-qualifier-list before 'pcre'
    /root/tmp/pear/APC/apc.c:369: error: expected specifier-qualifier-list before 'pcre'
    /root/tmp/pear/APC/apc.c: In function 'apc_regex_compile_array':
    /root/tmp/pear/APC/apc.c:430: error: 'apc_regex' has no member named 'preg'
    /root/tmp/pear/APC/apc.c:430: error: 'apc_regex' has no member named 'preg'
    /root/tmp/pear/APC/apc.c:431: error: 'apc_regex' has no member named 'nreg'
    /root/tmp/pear/APC/apc.c:431: error: 'apc_regex' has no member named 'nreg'
    /root/tmp/pear/APC/apc.c: In function 'apc_regex_match_array':
    /root/tmp/pear/APC/apc.c:463: error: 'apc_regex' has no member named 'preg'
    /root/tmp/pear/APC/apc.c:463: error: 'apc_regex' has no member named 'preg'
    /root/tmp/pear/APC/apc.c:464: error: 'apc_regex' has no member named 'nreg'
    /root/tmp/pear/APC/apc.c:464: error: 'apc_regex' has no member named 'nreg'
    make: *** [apc.lo] Error 1
    ERROR: `make' failed
    The APC.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20060613
    Any suggestions are greatly appreciated.
     
  5. cPanelDavidG

    cPanelDavidG Technical Product Specialist

    Joined:
    Nov 29, 2006
    Messages:
    11,279
    Likes Received:
    8
    Trophy Points:
    38
    Location:
    Houston, TX
    cPanel Access Level:
    Root Administrator
    In this situation, I recommend submitting a support ticket so we can diagnose what is causing this installation to fail.
     
  6. WebScHoLaR

    WebScHoLaR Well-Known Member

    Joined:
    Dec 14, 2005
    Messages:
    511
    Likes Received:
    2
    Trophy Points:
    18
    Location:
    Planet Earth

    You need to install pcre-devel package and it will be installed fine. Just install it as:

    Code:
    yum install pcre-devel
    and then you will be able to install it from WHM or using "pecl install apc"
     
  7. cPanelDavidG

    cPanelDavidG Technical Product Specialist

    Joined:
    Nov 29, 2006
    Messages:
    11,279
    Likes Received:
    8
    Trophy Points:
    38
    Location:
    Houston, TX
    cPanel Access Level:
    Root Administrator
    I am moving this thread out of the Feature Request forum since this is supported, but may not be working as desired on your specific system.
     
Loading...

Share This Page