What's problem? [checkperlmodules] The perl module SQL::Statement could not be insta

scegg

Member
Jan 22, 2011
9
0
51
Hi.

I recv this mail today.
I haven't adjust os modules after cPanel installed. cPanel is installed more than 1 week without any problem.

How to fix it?


[checkperlmodules] The perl module SQL::Statement could not be installed.

This module is required by cPanel, and the system may not function correctly until it is installed, and functional. Below is the results of the auto-install attempt:

Test Run
==============
Can't locate SQL/Statement.pm in @INC (@INC contains: /usr/local/lib/perl5/5.8.8/i686-linux /usr/local/lib/perl5/5.8.8 /usr/local/lib/perl5/site_perl/5.8.8/i686-linux /usr/local/lib/perl5/site_perl/5.8.8 /usr/local/lib/perl5/site_perl .) at - line 1.
BEGIN failed--compilation aborted at - line 1.


Installer Run
==============
Testing connection speed...(using fast method)...Done
Ping:0 (ticks) Testing connection speed to cpan.yimg.com using pureperl...(77500.00 bytes/s)...Done
Ping:1 (ticks) Testing connection speed to mirrors.mednor.net using pureperl...(34750.00 bytes/s)...Done
Ping:2 (ticks) Testing connection speed to mirror.uoregon.edu using pureperl...(19966.67 bytes/s)...Done
Three usable mirrors located
Mirror Check passed for cpan.yimg.com (/index.html)
Disabling /bin/wget since LWP is available at /usr/local/cpanel/Cpanel/cPCPAN/Config.pm line 82.
Disabling /bin/ftp since Net::FTP is available at /usr/local/cpanel/Cpanel/cPCPAN/Config.pm line 87.
commit: wrote '/usr/local/lib/perl5/5.8.8/CPAN/Config.pm'
Going to read '/home/.cpan/Metadata'
Database was generated on Mon, 31 Jan 2011 10:31:41 GMT
Running install for module 'SQL::Statement'
Running make for R/RE/REHSACK/SQL-Statement-1.32.tar.gz
CPAN: Digest::SHA loaded ok (v5.50)
CPAN: Compress::Zlib loaded ok (v2.033)
Checksum for /home/.cpan/sources/authors/id/R/RE/REHSACK/SQL-Statement-1.32.tar.gz ok
CPAN: Archive::Tar loaded ok (v1.76)
SQL-Statement-1.32
SQL-Statement-1.32/t
SQL-Statement-1.32/t/04idents.t
SQL-Statement-1.32/t/03import.t
SQL-Statement-1.32/t/SQLtest.pm
SQL-Statement-1.32/t/17quoting.t
SQL-Statement-1.32/t/02execute.t
SQL-Statement-1.32/t/00error.t
SQL-Statement-1.32/t/01prepare.t
SQL-Statement-1.32/t/09ops.t
SQL-Statement-1.32/t/08join.t
SQL-Statement-1.32/t/TestLib.pm
SQL-Statement-1.32/t/06virtual.t
SQL-Statement-1.32/t/12eval.t
SQL-Statement-1.32/t/23dialects.t
SQL-Statement-1.32/t/10limit.t
SQL-Statement-1.32/t/05simple.t
SQL-Statement-1.32/lib
SQL-Statement-1.32/lib/SQL
SQL-Statement-1.32/lib/SQL/Dialects
SQL-Statement-1.32/lib/SQL/Dialects/ANSI.pm
SQL-Statement-1.32/lib/SQL/Dialects/Role.pm
SQL-Statement-1.32/lib/SQL/Dialects/AnyData.pm
SQL-Statement-1.32/lib/SQL/Dialects/CSV.pm
SQL-Statement-1.32/lib/SQL/Statement
SQL-Statement-1.32/lib/SQL/Statement/TermFactory.pm
SQL-Statement-1.32/lib/SQL/Statement/Structure.pod
SQL-Statement-1.32/lib/SQL/Statement/GetInfo.pm
SQL-Statement-1.32/lib/SQL/Statement/Term.pm
SQL-Statement-1.32/lib/SQL/Statement/Syntax.pod
SQL-Statement-1.32/lib/SQL/Statement/RAM.pm
SQL-Statement-1.32/lib/SQL/Statement/Placeholder.pm
SQL-Statement-1.32/lib/SQL/Statement/Roadmap.pod
SQL-Statement-1.32/lib/SQL/Statement/Function.pm
SQL-Statement-1.32/lib/SQL/Statement/Util.pm
SQL-Statement-1.32/lib/SQL/Statement/Embed.pod
SQL-Statement-1.32/lib/SQL/Statement/Operation.pm
SQL-Statement-1.32/lib/SQL/Statement/Functions.pm
SQL-Statement-1.32/lib/SQL/Statement.pm
SQL-Statement-1.32/lib/SQL/Parser.pm
SQL-Statement-1.32/lib/SQL/Eval.pm
SQL-Statement-1.32/Changes
SQL-Statement-1.32/MANIFEST
SQL-Statement-1.32/META.yml
SQL-Statement-1.32/xt
SQL-Statement-1.32/xt/pod_coverage.t
SQL-Statement-1.32/xt/pod.t
SQL-Statement-1.32/xt/pod-cm.t
SQL-Statement-1.32/.aspell.local.pws
SQL-Statement-1.32/MANIFEST.SKIP
SQL-Statement-1.32/Makefile.PL
SQL-Statement-1.32/README
CPAN: File::Temp loaded ok (v0.22)
CPAN: YAML loaded ok (v0.72)

CPAN.pm: Going to build R/RE/REHSACK/SQL-Statement-1.32.tar.gz

Checking if your kit is complete...
Looks good
Warning: prerequisite DBD::AnyData 0.110 not found.
Warning: prerequisite DBD::CSV 0.30 not found.
Writing Makefile for SQL::Statement
---- Unsatisfied dependencies detected during ----
---- REHSACK/SQL-Statement-1.32.tar.gz ----
DBD::AnyData [requires]
DBD::CSV [requires]
Running make install
Delayed until after prerequisites
Running install for module 'DBD::AnyData'
Running make for R/RE/REHSACK/DBD-AnyData-0.110.tar.gz
Checksum for /home/.cpan/sources/authors/id/R/RE/REHSACK/DBD-AnyData-0.110.tar.gz ok
DBD-AnyData-0.110
DBD-AnyData-0.110/META.yml
DBD-AnyData-0.110/Changes
DBD-AnyData-0.110/MANIFEST
DBD-AnyData-0.110/MANIFEST.SKIP
DBD-AnyData-0.110/Build.PL
DBD-AnyData-0.110/Makefile.PL
DBD-AnyData-0.110/README
DBD-AnyData-0.110/lib
DBD-AnyData-0.110/lib/DBD
DBD-AnyData-0.110/lib/DBD/AnyData.pm
DBD-AnyData-0.110/t
DBD-AnyData-0.110/t/00-load.t
DBD-AnyData-0.110/t/manifest.t
DBD-AnyData-0.110/t/pod.t
DBD-AnyData-0.110/t/01-basic.t
CPAN: Module::Build loaded ok (v0.3624)

CPAN.pm: Going to build R/RE/REHSACK/DBD-AnyData-0.110.tar.gz

Checking if your kit is complete...
Looks good
Warning: prerequisite AnyData 0.07 not found.
Warning: prerequisite SQL::Statement 1.27_02 not found.
Writing Makefile for DBD::AnyData
---- Unsatisfied dependencies detected during ----
---- REHSACK/DBD-AnyData-0.110.tar.gz ----
SQL::Statement [requires]
AnyData [requires]

Recursive dependency detected:
SQL::Statement (have: N/A; want: 1.32)
=> REHSACK/SQL-Statement-1.32.tar.gz
=> DBD::AnyData (have: N/A; requires: 0.110)
=> REHSACK/DBD-AnyData-0.110.tar.gz
=> SQL::Statement (have: N/A; requires: 1.27_02).
Cannot resolve.
REHSACK/DBD-AnyData-0.110.tar.gz
[depend] -- NOT OK

Running make install
Make had returned bad status, install seems impossible
Running install for module 'DBD::CSV'
Running make for H/HM/HMBRAND/DBD-CSV-0.31.tgz

Checksum for /home/.cpan/sources/authors/id/H/HM/HMBRAND/DBD-CSV-0.31.tgz ok
DBD-CSV-0.31/
DBD-CSV-0.31/README
DBD-CSV-0.31/MANIFEST.SKIP
DBD-CSV-0.31/t/
DBD-CSV-0.31/t/42_bindparam.t
DBD-CSV-0.31/t/11_dsnlist.t
DBD-CSV-0.31/t/51_commit.t
DBD-CSV-0.31/t/43_blobs.t
DBD-CSV-0.31/t/31_delete.t
DBD-CSV-0.31/t/50_chopblanks.t
DBD-CSV-0.31/t/30_insertfetch.t
DBD-CSV-0.31/t/00_pod.t
DBD-CSV-0.31/t/lib.pl
DBD-CSV-0.31/t/40_numrows.t
DBD-CSV-0.31/t/80_rt.t
DBD-CSV-0.31/t/00_pod_cov.t
DBD-CSV-0.31/t/10_base.t
DBD-CSV-0.31/t/70_csv.t
DBD-CSV-0.31/t/72_csv-schema.t
DBD-CSV-0.31/t/00_meta.t
DBD-CSV-0.31/t/60_misc.t
DBD-CSV-0.31/t/48_utf8.t
DBD-CSV-0.31/t/71_csv-ext.t
DBD-CSV-0.31/t/73_csv-case.t
DBD-CSV-0.31/t/41_nulls.t
DBD-CSV-0.31/t/20_createdrop.t
DBD-CSV-0.31/t/44_listfields.t
DBD-CSV-0.31/examples/
DBD-CSV-0.31/examples/passwd.pl
DBD-CSV-0.31/META.yml
DBD-CSV-0.31/MANIFEST
DBD-CSV-0.31/lib/
DBD-CSV-0.31/lib/DBD/
DBD-CSV-0.31/lib/DBD/CSV.pm
DBD-CSV-0.31/lib/Bundle/
DBD-CSV-0.31/lib/Bundle/DBD/
DBD-CSV-0.31/lib/Bundle/DBD/CSV.pm
DBD-CSV-0.31/ChangeLog
DBD-CSV-0.31/Makefile.PL

CPAN.pm: Going to build H/HM/HMBRAND/DBD-CSV-0.31.tgz

Checking if your kit is complete...
Looks good
Warning: prerequisite SQL::Statement 1.3 not found.
Writing Makefile for DBD::CSV
---- Unsatisfied dependencies detected during ----
---- HMBRAND/DBD-CSV-0.31.tgz ----
SQL::Statement [requires]

Recursive dependency detected:
SQL::Statement (have: N/A; want: 1.32)
=> REHSACK/SQL-Statement-1.32.tar.gz
=> DBD::AnyData (have: N/A; requires: 0.110)
=> REHSACK/DBD-AnyData-0.110.tar.gz
=> SQL::Statement (have: N/A; requires: 1.27_02).
Cannot resolve.
HMBRAND/DBD-CSV-0.31.tgz
[depend] -- NOT OK

Running make install
Make had some problems, won't install
Running make for R/RE/REHSACK/SQL-Statement-1.32.tar.gz
Has already been unwrapped into directory /home/.cpan/build/SQL-Statement-1.32-LZNW4U

CPAN.pm: Going to build R/RE/REHSACK/SQL-Statement-1.32.tar.gz


Warning: Prerequisite 'DBD::AnyData => 0.110' for 'REHSACK/SQL-Statement-1.32.tar.gz' failed when processing 'REHSACK/DBD-AnyData-0.110.tar.gz' with 'make => NO cannot resolve circular dependency'. Continuing, but chances to succeed are limited.
CPAN: Time::HiRes loaded ok (v1.9721)
---- Unsatisfied dependencies detected during ----
---- REHSACK/SQL-Statement-1.32.tar.gz ----
DBD::CSV [requires]

Recursive dependency detected:
DBD::CSV (have: N/A; want: 0.31)
=> HMBRAND/DBD-CSV-0.31.tgz
=> SQL::Statement (have: N/A; requires: 1.3)
=> REHSACK/SQL-Statement-1.32.tar.gz
=> DBD::AnyData (have: N/A; requires: 0.110)
=> REHSACK/DBD-AnyData-0.110.tar.gz
=> SQL::Statement (have: N/A; requires: 1.27_02).
Cannot resolve.
REHSACK/SQL-Statement-1.32.tar.gz
[depend] -- NOT OK

Running make install
Make had returned bad status, install seems impossible

perlmod--Install done
 

hardmax

Registered
Feb 2, 2011
1
0
51
Re: What's problem? [checkperlmodules] The perl module SQL::Statement could not be i

The same problem, only I make a update and that message appear. My OS is CentOS 5 64bits
 

LinuxTechie

Well-Known Member
Jan 22, 2011
502
9
68
cPanel Access Level
Root Administrator